Hammerite Brush Cleaner And Thinners – Next Day Paint
4.9 (800) · € 5.00 · In Magazzino
![Hammerite Brush Cleaner And Thinners – Next Day Paint](http://nextdaypaint.co.uk/cdn/shop/files/hammerite-brush-cleaner-and-thinners.jpg?v=1706895023)
Ideal for cleaning brushes after the use of the Hammerite paint range or thinning paint products ready for spraying. Available with fast despatch and delivery.
Overview Hammerite Satin Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It's a subtle satin smooth finish which provides a low sheen alternative. Hammerite metal paint is a durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. Primer or undercoat are not necessary for sound surfaces. Ideal for use on metal doors, garden furniture, gates, railings and more. Available in a range of sizes including a handy aerosol spray can for quick and easy application.
Satin finish
Ultra tough paint
Can be applied direct to rust
8 year corrosion protection
Excellent weather resistance
Area
Exterior
Recommended Use
Metal Surfaces
Base
Solvent based
Coverage
5m² per litre
Drying Time
Touch dry 1-2 hours
Re-Coat Time
4 hours
Recommended Coats
1 or 2 coats
Application Method
Brush
VOC Levels
High
Clean Up
Remove as much paint as possible from the brush before cleaning with brush cleaner
PreparationAlways ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.
Remove all loose rust and flaking paint from the metal using a wire brush.
Remove dirt and dust with diluted detergent.
For smooth metal surfaces, lightly abrade for maximum adhesion.
On bare zinc, aluminium and galvanised surfaces firstly apply Hammerite Special Metals Primer.
Cover surrounding areas to catch any overspray or drips.
ApplicationBefore application test Hammerite Satin Direct to Rust Metal Paint onto the painted surfaces and leave for 1 hour. If there is no reaction continue to apply, if there is a reaction with the previous paint all paint must be removed before applying Hammerite Direct to Rust Metal Paint.
For Bare Zinc, aluminium and galvanised surfaces firstly apply Hammerite Special Metals Primer.
Do not apply in temperatures below 8°C or above 25°C.
Lightly stir before use.
Do not thin.
On previously painted metal in a sound condition 1 coat should be sufficient.
On bare or rusty metals 2 coats are recommended for best results.
Ensure all edges and corners are adequately covered for maximum durability.
On vertical surfaces do not over apply as sagging will occur.
Note: Always follow the manufacturer instructions found on the tin. FAQ'sQ. Do I need to apply Primer before using Hammerite Satin Direct To Rust Metal Paint?
A. Primer or undercoat is not needed before using Hammerite paint, but it is important to ensure the surface to be treated is clean, dry and free from any dust, dirt, grease or flaking paint.
Q. Does Hammerite Satin Direct To Rust Metal Paint stop rust?
A. Yes, Hammerite has been special formulated to be applied directly to rust as it contains special anti-corrosive pigments that stop the formation of rust. Because of this you don't even need to apply an undercoat or primer.
Q. Is Hammerite Satin Direct To Rust Metal Paint durable?
A. Hammerite paint is easy to use and durable. It offers 8 years of corrosion protection against rust once applied and stands up to the elements.
Q. Can Hammerite Satin Direct To Rust Metal Paint be sprayed?
A. To thin paint for spraying with conventional spray equipment: Use 2 part of Hammerite Metal Paint to 1 part Hammerite Brush Cleaner & Thinners.
Overview Hammerite Direct to Rust Metal Paint is a durable, corrosion resistant, decorative coating. The decorative hammered appearance is smooth to the touch and sheds water well. Hammerite metal paints are formulated to perform as a primer, undercoat and topcoat in one. It can be applied directly onto rusty metal with either a brush or roller. Hammerite hammered finish paint is available in a range of colours including Black, Dark Green, Red and Silver.
Up to 8 years rust protection
Ultra tough, hammered finish
Excellent weather resistance
No need for a primer or undercoat
Available in a range of colours
Area
Exterior
Recommended Use
Metal Surfaces
Base
Solvent based
Coverage
5m² per litre
Drying Time
Touch dry 1-2 hours
Re-Coat Time
4 hours
Recommended Coats
1 or 2 coats
Application Method
Brush
VOC Levels
High
Clean Up
Remove as much paint as possible from the brush before cleaning with brush cleaner
PreparationAlways ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.
Remove all loose rust and flaking paint from the metal using a wire brush.
Remove dirt and dust with diluted detergent.
For smooth metal surfaces, lightly abrade with a 240 grit sandpaper for maximum adhesion.
On bare zinc, aluminium and galvanised surfaces firstly apply Hammerite Special Metals Primer.
Cover surrounding areas to catch any overspray or drips.
ApplicationBefore applying the Hammered Direct to Rust Metal Paint test a small area and leave for 1 hour to ensure compatability. If there is no reaction apply the hammered paint directly to surface.
If there is a reaction remove all paint before applying Hammerite Direct to Rust Metal Paint.
Do not apply in temperatures below 8˚C or above 25˚C.
Lightly stir before application, it is advised to not thin this product.
Apply with a narrow brush for railings and a broad brush on larger metal objects, such as a garden table.
On previously painted metal in sound condition, one coat should be sufficient.
On bare/rusty metal, two coats will be required for full depth of colour.
Ensure edges and corners are adequately covered to give the surface maximum durability.
Do not over apply as sagging will occur, be especially careful on vertical surfaces such as railings.
Note: Always follow the manufacturer instructions found on the tin.Aftercare & StorageStore in a dry well ventilated area and protect from frost and strong sunlight. FAQ'sQ. What does hammered mean?
A. A hammered coating looks as though it has been repeatedly hit with a small hammer, without damaging the paint or the substrate. It leaves you with a subtle effect and has a metallic sheen. Hammerite Hammered paint is still smooth to touch and the small dimples will shed water.
Q. Can Hammerite Hammered Direct To Rust Metal Paint prevent rust?
A. The Hammerite Direct to Rust paints can prevent rust from metal appearing through the surface. The special formulation acts like a barrier as it contains anti-corrosive pigments that stop the formation of rust.
Q. Can you use hammerite direct to rust metal paint on radiators?
A. We would not recommend using the Hammerite Direct to Rust paints on radiators as it's not specially designed to be resistant to heat, instead use Hammerite Radiator Enamel Metal Paint
Overview Hammerite Smooth Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It’s a smooth gloss finish which will retain its sheen for years with excellent weather resistance. It’s durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. Primer or undercoat are not necessary for sound surfaces.
If you can't find the colour you're looking for here, try our Hammerite Metal Paint Mixed Colours Range
Hammerite smooth gloss finish
Ultra tough
Easy to use
8 year corrosion protection
Excellent weather resistance
Area
Exterior
Recommended Use
Metal Surfaces
Base
Solvent based
Coverage
5m² per litre
Drying Time
Touch dry 1-2 hours
Re-Coat Time
4 hours
Recommended Coats
1 or 2 coats
Application Method
Brush
VOC Levels
High
Clean Up
Remove as much paint as possible from the brush before cleaning with brush cleaner
PreparationAlways ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.
Sand/abrade smooth surfaces and remove any loose rust or flaking paint.
Remove dirt, dust and grease with a solution of diluted detergent.
Rinse with clean water and allow time to dry.
Hammerite smooth metal paint is available in a wide range of colours, as screen resolutions can vary we always recommend testing the paint prior to full application to ensure you are happy with the finished results.
ApplicationBefore application of Hammerite Smooth Direct to Rust Metal Paint test a patch onto the painted surfaces and leave for 1 hour. If there is no reaction continue to apply, if there is a reaction with the previous paint all paint must be removed before applying Hammerite Direct to Rust Metal Paints.
For Bare Zinc, aluminium and galvanised surfaces firstly apply Hammerite Special Metals Primer.
Do not apply in temperatures below 8°C or above 25°C.
Lightly stir before use.
Do not thin, this smooth metal paint has been supplied ready to use.
On previously painted metal in a sound condition 1 coat should be sufficient.
On bare or rusty metals 2 coats may be required.
For maximum durability ensure all edges and corners are adequately covered.
Do not over apply as sagging will occur, be especially careful on veretical surfaces.
Note: Always follow the manufacturer instructions found on the tin. FAQ'sQ. Do I need to apply Primer before using Hammerite Smooth Direct To Rust Metal Paint?
A. Primer or undercoat is not needed before using Hammerite paint, but it is important to ensure the surface to be treated is clean, dry and free from any dust, dirt, grease or flaking paint. For Bare Zinc, aluminium and galvanised surfaces firstly apply Hammerite Special Metals Primer.
Q. Does Hammerite Smooth Direct To Rust Metal Paint rust?
A. Yes, Hammerite has been special formulated to be applied directly to rust as it contains special anti-corrosive pigments that stop the formation of rust. Because of this you don't even need to apply an undercoat or primer.
Q. Is Hammerite Smooth Direct To Rust Metal Paint durable?
A. Hammerite paint is easy to use and durable. It offers 8 years of corrosion protection against rust once applied and stands up to the elements.
Q. Can Hammerite Smooth Direct To Rust Metal Paint be sprayed?
A. To thin paint for spraying with conventional spray equipment: Use 2 part of Hammerite Metal Paint to 1 part Hammerite Brush Cleaner & Thinners.
Overview Hammerite Smooth Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It’s a smooth gloss finish which will retain its sheen for years with excellent weather resistance. It’s durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. Primer or undercoat are not necessary for sound surfaces.
If you can't find the colour you're looking for from the Mixed Colour range here, try our Hammerite Smooth Direct to Rust pre mixed range.
Smooth gloss finish
Ultra tough
Easy to use
8 year corrosion protection
Excellent weather resistance
Area
Exterior
Recommended Use
Metal Surfaces
Base
Solvent based
Coverage
5m² per litre
Drying Time
Touch dry 1-2 hours
Re-Coat Time
4 hours
Recommended Coats
1 or 2 coats
Application Method
Brush
VOC Levels
High
Clean Up
Remove as much paint as possible from the brush before cleaning with brush cleaner
PreparationAlways ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.
Sand/abrade smooth surfaces and remove any loose rust or flaking paint.
Remove dirt, dust and grease with a solution of diluted detergent.
Rinse with clean water and allow time to dry.
Hammerite smooth metal paint is available in a wide range of colours, as screen resolutions can vary we always recommend testing the paint prior to full application to ensure you are happy with the finished results.
ApplicationBefore application test Hammerite Smooth Direct to Rust Metal Paint onto the painted surfaces and leave for 1 hour. If there is no reaction continue to apply, if there is a reaction with the previous paint all paint must be removed before applying Hammerite Direct to Rust Metal Paint.
For Bare Zinc, aluminium and galvanised surfaces firstly apply Hammerite Special Metals Primer.
Do not apply in temperatures below 8°C or above 25°C.
Lightly stir before use.
Do not thin.
On previously painted metal in a sound condition 1 coat should be sufficient.
On bare or rusty metals 2 coats may be required.
Ensure all edges and corners are adequately covered.
Do not over apply as sagging will occur.
Note: Always follow the manufacturer instructions found on the tin. FAQ'sQ. Do I need to apply Primer before using Hammerite Satin Direct To Rust Metal Paint?
A. Primer or undercoat is not needed before using Hammerite paint, but it is important to ensure the surface to be treated is clean, dry and free from any dust, dirt, grease or flaking paint.
Q. Does Hammerite Satin Direct To Rust Metal Paint stop rust?
A. Yes, Hammerite has been special formulated to be applied directly to rust as it contains special anti-corrosive pigments that stop the formation of rust. Because of this you don't even need to apply an undercoat or primer.
Q. Is Hammerite Satin Direct To Rust Metal Paint durable?
A. Hammerite paint is easy to use and durable. It offers 8 years of corrosion protection against rust once applied and stands up to the elements.
Q. Can Hammerite Satin Direct To Rust Metal Paint be sprayed?
A. To thin paint for spraying with conventional spray equipment: Use 2 part of Hammerite Metal Paint to 1 part Hammerite Brush Cleaner & Thinners.
![Hammerite 5084904 Metal Paint: Satin Black 250ml & 5084918 HAM6721501 250ml Brush Cleaner and Thinners : : DIY & Tools](https://m.media-amazon.com/images/I/61KGAP1gnsL.jpg)
Hammerite 5084904 Metal Paint: Satin Black 250ml & 5084918 HAM6721501 250ml Brush Cleaner and Thinners : : DIY & Tools
![Hammerite Brush Cleaner and Thinners](https://img.yumpu.com/38465611/1/500x640/hammerite-brush-cleaner-and-thinners.jpg)
Hammerite Brush Cleaner and Thinners
![Hammerite Direct to Rust Metal Paint Smooth Finish - Paint Direct](https://www.paint-direct.co.uk/content/images/products/132285825890161614-hammerite-direct-to-rust-metal-paint-smooth.jpg?w=1920&quality=50&format=webp)
Hammerite Direct to Rust Metal Paint Smooth Finish - Paint Direct
![Tenaru Thinners](https://www.tenaru.com.au/ts1687850565/attachments/Product/1038/Hammerite_Brush_Cleaner_and_Thinners_1L.jpg)
Tenaru Thinners
![Buy Hammerite Metal Paint Smooth Gold 750ml](https://www.haldane-fisher.com/media/catalog/product/cache/e14f3483f93892b6203ef02d6d31d9f6/3/9/39aeb0007106807402e4cea1f79d226c2f9d1bcb_5092830_750ml_Hammerite_Metal_Paint_Smooth_Gold.jpg_1.jpg)
Buy Hammerite Metal Paint Smooth Gold 750ml
![Hammerite Brush Cleaner And Thinners – Next Day Paint](http://nextdaypaint.co.uk/cdn/shop/files/hammerite-brush-cleaner-and-thinners.jpg?v=1706895023)
Hammerite Brush Cleaner And Thinners – Next Day Paint
![Hammerite Direct to Rust Metal Paint Smooth Finish, Wild Thyme](https://www.coloursupplies.com/storage/app/uploads/public/a89/f1a/b3d/thumb__450_0_0_0_auto.jpg)
Hammerite Direct to Rust Metal Paint Smooth Finish, Wild Thyme
![Hammerite Direct To Rust Metal Paint Smooth Finish 2 5L](https://files.ekmcdn.com/avenueonline/images/hammerite-direct-to-rust-metal-paint-smooth-finish-2.5l-11016-p.png)
Hammerite Direct To Rust Metal Paint Smooth Finish 2 5L
![Hammerite Brush Cleaner & Thinners 250ml](https://cdn.shopify.com/s/files/1/0225/1754/7085/files/5011867045818.jpg?v=1693297868&width=2089)
Hammerite Brush Cleaner & Thinners 250ml
![Hammerite NO. 1 Rust Beater Metal Paint – Next Day Paint](http://nextdaypaint.co.uk/cdn/shop/files/hammerite-no-1-rust-beater-parent.jpg?v=1706893188)
Hammerite NO. 1 Rust Beater Metal Paint – Next Day Paint
![Buy Hammerite Metal Paint Smooth Gold 250ml](https://www.haldane-fisher.com/media/catalog/product/cache/e14f3483f93892b6203ef02d6d31d9f6/8/1/81fa9ba718795e8a49f7e87ef614d7825f6225f1_250ml_Hammerite_Metal_Paint_Smooth_Gold_1.jpg)
Buy Hammerite Metal Paint Smooth Gold 250ml
![Qoo10 - 【Hammerite】Brush Cleaner and Thinner 250ml (Removes Dirt Grim Salt and : Tools & Gardenin](https://gd.image-gmkt.com/li/489/331/1527331489.g_520-w-st_g.jpg)
Qoo10 - 【Hammerite】Brush Cleaner and Thinner 250ml (Removes Dirt Grim Salt and : Tools & Gardenin